Published at Saturday, February 24th, 2018 - 03:31:36 AM. bathroom vanity lighting. By Victoria Carrell.
Some bathroom vanity lighting may use special bulbs, which may cause problems when the time comes to change them as they are not commonly sold in stores or their production may have been discontinued. Avoid bright white or yellow bulbs for they tend to be harsh with unrealistic colors and they make the skin look paler and washed out. A neodymium bulb may be a good choice as they imitate sunlight. Some vanity lighting may use halogen lamps since they disperse light, resulting to a softer look but without shadows being casted. Choose some bulbs that are covered with frosted glass to have a more flattering result and better illumination. Fluorescent bulbs with Color Rendering Index of eighty or more can also be used and may be ideal for the bathroom since they generate less heat compared to the incandescent bulbs and would last longer.
Once you've found a suitable ceiling light to access the power from, you will need to run a power line to feed the vanity light. For this you will need plenty of 14-2 wiring to run from the light source to the vanity area. Don't attach any wires to the fixture just yet. Run the power wire directly to the wall where the vanity light will be located. Drill a ¾" hole through the top plate of the wall. Now fish down enough wire to reach the vanity area behind the wall.
Any content, trademark’s, or other material that might be found on the Enotecadivino.com website that is not Enotecadivino.com’s property remains the copyright of its respective owner/s. In no way does Enotecadivino.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.